Chosen Solution I charge my phone, like always to 100%. Next thing I know after 2 hours my phone is at 1% with flash light on, for like an half an hour. I have no idea wtf is going on. Like I can watch one of “The Flash” episoed at 1% with flashlight on + with background music on. Like right now I’m typing this at 1% battery life with my flashlight on…....
Chosen Solution Hi everyone, The adhesive tabs on my battery broke during removal of the battery, using a hair dryer I heated up the phone to assist with prying the battery off the device. While attempting to remove the battery of my iPhone 6s Plus, I puunctured the battery with the plastic spudger. There was a small hiss and pop and a small flame. The battery is still very much attached to the metal rear chassis of the phone but I dare not continue to try and pry the battery off....
Chosen Solution Am adding an evo 850 SSD to my 2008 3.06 ghz 24" iMac, and removing the redundant SuperDrive. Will best performance come from the new SSD in the old HHD bay (and moving the old HDD to the SuperDrive bay) or the other way round, or does it make no difference? Sorry guy not so simple! You have two different drive interfaces in this system a SATA I (1....
Chosen Solution My GearFit 2 Pro died. I placed it on the charger and now the screen is black. It still vibrates with notifications. The app says it’s connected via Bluetooth but I just can’t see anything. Help? Hi @tellz, If it has a black screen of death that could mean 2 things: the panel itself is dead the backlight is dead To test for two, hold a bright flashlight at an extreme angle to see if you find an image....
Chosen Solution When I boil water in the kettle, it comes out smelling and tasting like chemicals. Is this bad? Is there any way to get rid of it? Does it go away over time? The chemical taste and smell is a common byproduct of the kettle due to the manufacturing process. However, there is a simple way to take care of your problem. To remove the chemical smell and taste, boil vinegar mixed with water in the kettle....
Chosen Solution Hello I bought display already set up with prox. sensor and homebutton but the touch id doesn’t work.It doesn’t let me in settings add there my finger. Do you know why? Did the seller betray me? unfortunately every iPhone 5s home button/touch id, is saved on the A7 chip, they cannot be interchanged, cannot buy a new one and install and expect to work, you could try using the original home button, that should work...
Chosen Solution Hello, I have an Acer aspire 5742g and my screen is broken. I know the laptop works since i can manage log in to windows (i can hear the log in sound), but the screen is all white and grey. I have a few documents i would really need for school, so i’ve tried to use an external monitor (both another laptop and a tv) but it doesn’t work....
Chosen Solution When I power up my Sony W230 it gives me the option to set the clock and date or bypass it altogether. I set the date and time. I can then take photos. If I power it off and then on again, I get the same screen for setting the clock and date from. I have changed battery to freshly charged one… Reset to original settings… Formatted card… Switched out cards… Removed battery overnight… Nothing works....
Chosen Solution Hello, My iphone 4S fell yesterday and the screen immediately stopped working ( it is not cracked or anything ). My phone still receives messages and phone calls but the screen stays black. I’ve tried to press the home/lock button but it didn’t help. I opened the phone thinking that the connection between the screen and the logic board might have snapped or something. It was indeed not connected anymore so I was thrilled and thought that I might be able to solve the issue but even after putting everything together, same issue !...
Chosen Solution Is it possible to order the adhesive removal tool without the battery as battery is not shipped internationally? It’s acetone and a syringe. Both can be had at your local pharmacy. Personally I use methanol (a pure alcohol with no water).
Chosen Solution Hi, the ribbon cable glued to the touch screen has fallen off. I can see from the outside that the cable is loose (1.6 inch long hole in the bezel), opening the device confirms this. Of course, the device does not respond to touch events any more. Is it possible to re-glue that cable to the screen? Which kind of glue would I have to use? How is the process of re-glueing the cable to the screen?...
Chosen Solution I need to replace my whole keyboard , in my macbook 12 2016, I want to know if I can replace it with a 2015 model keyboard, I can’t find a modest price for the 2016 model and the 2015 is more accessible. Thank you very much. Im not sure it will work. Each year parts are different, even if its hard to tell, even the slightest pin connectors will not match....
Chosen Solution Trying to replace the battery and the adhesive strips broke, Trying the dental floss removal as directed, the antenna that is connected to the logic board was damaged. Never did get the battery out. Reassembled. Appears I can’t get WiFi is the only function lost. can this antenna be replaced? (by someone who can replace the battery/) See the answer to you’re other question: (Antenna cable from Logic board damaged)
Chosen Solution My Toshiba Satellite e205-s1904 came with a 10/100 ethernet and Intel 802.11a/g/n wireless LAN. I want to upgrade to a 10/100/1000 ethernet or similar and to 802.11ac wireless connection. Is this possible on my laptop? Sadly both are not upgradable. While the WiFi board is removable its an older form factor and nothing newer has been offered. The Ethernet logic is part of the logic board (soldered).
Chosen Solution So in your mind RPM is the ticket for fast data. We’ll in years past that was often the case over time newer recording methods have on the most part altered things. So its more important to scrub through the data sheets to be sure here. The other factor is heat! High RPM drives tend to run hotter! So tight systems like the iMac 21.5" and the Mac Mini can encounter heat issues....
Chosen Solution I have a broken home button but I would like to keep touch id so I don’t want a replacement home button. If I get a original home button off another iphone 6s will i be able to keep touch id? Thank you for you’re help! you can your but touch id function wont work why because your original touch id paired with cpu… if you put another touch id finger print not work so you not able to use touch id function you can use for menu button function...
Chosen Solution Macbook 12" Retina Early 2015 Hi, I broke the trackpad ribbon cable of my Macbook 2015 while doing another repair and there’s no stock for the replacement cable… There’s stock for the 2016 cable, if the cables are not compatible can I just replace the 2015’s trackpad by the 2016’s trackpad + cable? Cheers, Pierre MacBook Pro 13" Retina Display Early 2015 Trackpad Replacement A1534 - 2746 MacBook 12" Retina Trackpad Flex Cable Retina MacBook 2016 Teardown A1534 - 2991 YES, It’s compatible: http://www....
Chosen Solution When I opened my asus q504u I did not see any ram slots? Is it built in to the motherboard? Several websites said that the ram is upgradeable. Hi, How much RAM do you have installed? According to the specifications for a Q504UA it is 12 GB DDR4 2133MHz SDRAM, up to 16 GB SDRAM. This link from Crucial memory seems to indicate that 2GB, 4GB, 8GB and 16GB SODIMM modules are compatible with your laptop and that there are two (2) slots....
Chosen Solution So here’s my problem. I’ve accidentally dropped my phone in the water and I’ve tried pressing the back and task manager button but failed. Hi, As you know water and electronics and electricity are not a good mix. The water causes corrosion and provides circuit paths for the electricity which were not in the phone’s operating design and could damage the components. First do not turn on your phone and then you need to remove the battery as soon as possible from the phone to minimize further damage....
Chosen Solution I had a friend give me an A1059 29GB ipod classic (I think it’s 4th generation). Came with a large charger and firewire cable. When I try to connect it via the usb port in my car, no music or charging occurs. Is there a specific 30PIN connector I need to make it work? I’ve tried two others to no avail. Hi @krbmedia , Search online for a Ipod Classic USB cable (example only)....
