Posts

Chosen Solution I have a tablet with the touch panel broken and someone sells a nonworking similar tablet with the touch-panel intact. Both are 7 inch, mine has an Allwinner A10 SoC, the other has an A13? How likely is it that the other one has a compatible touch panel and I can get it to work with mine? Note: I don’t care about the thickness of the unresponsive edge of the panel if it has such, since I will 3D-print a new housing anyway....

Chosen Solution I need help finding a Bernina 830e service manual. (This is for the electronic/embroidery/sewing machine, not the manual for the 830/831 record that is already listed on this site.) I live waaaaay too far away to get to a dealer for repairs, updates, etc. ‘‘No, my problems/answers are neither found on the Bernina web site nor in the Instruction manual. I have the 250+ page Instruction manual; I need the Service/Repair Manual....

Chosen Solution I can not get my screen to turn on. The laptop is on and after only a minute my laptop is super hot and I have removed the charger. I have removed the battery, tried different rebootings, and it still doesn’t turn on and continues to get hot. I don’t know what to do. @lilimae the getting hot part is what would worry me. Seems like it is time to open up your laptop....

Chosen Solution Hi, my Bluetooth speaker stopped charging one day. As far as I know it did not suffer any physical damage or anything of sorts. I used to carry it with me sometimes but usually in a bag. It still has some juice in it because it turns on but after a few seconds turns itself of with not enough battery. LED indicator doesn’t even lit up when I connect it to USB cable....

Chosen Solution My usb port is peeled out with the contact points on board, there no way to replace a new port. But i want to copy the data in internal stoeage. So please tell me thar how to connect a usb cable directly to the board. Thank you. First of all, double check that you can’t peel your data off via Bluetooth. Or maybe it charges through the microUSB port and the battery is flat?...

Chosen Solution I’ve got an iPhone 5s that I replaced the screen for, since the screen replacement it has been stuck bootlooping. I am able to get into recovery mode but it won’t update nor restore, keeps running into error 9. Have tried updating itunes, using different battery, different charge port, different screens, different cables doing it without the camera/speakers flex plugged in. Is doing it now with the original screen as well....

Chosen Solution Hi So I had some water demage to my phone, everything worked but the battery wasn’t charging anymore. Everything else worked so I opended my iphone 6s up and checked with a voltage meter and my lightning port has a good voltage but my battery gives 0 volt. So I guess i have to replace the battery, where is the (cheapest) best place to buy just the battery and not the whole kit as i already have all the tools in EU (Belgium)....

Chosen Solution Hi, I just tried to repair my iphone 5s. While trying to remove the battery i accidently ripped the small curled cable, right above the battery. [img]http://i.imgur.com/FPsvcG2.jpg[/img] http://imgur.com/FPsvcG2 After finishing my repair, the phone is not turning on. Is it because of the cable? How can I repair/exchange the cable? Thank you very much, Greets, Lenny That is only the wifi connector and would not affect the function of it turning on

Chosen Solution I have not been able to receive wireless on my iPhone 3GS. I have done all the troubleshooting I could find on the Internet, worked with Apple support via phone and finally visited a store and a Genius checked out the phone. He said it was a hardware failure problem and that I would need to pay $199 to replace the phone. A tech savvy friend pointed me to this site....

Chosen Solution I have never attempted taking apart an iPhone before. I am generally familiar with the parts, but not with their connections. I am interested in taking an iPhone apart and making a display(like a museum display, not an LCD-type display) of the different layers of components in a way similar to CG models that can be found online. I would be content with this, but I wanted to go one step further - Would it be possible to display a deconstructed iphone with connections made between components such that the phone could be somewhat operable?...

Chosen Solution I have a Lenovo X1 carbon 4th gen, it has core i5 6th gen CPU and 8GB of RAM. Can I replace its motherboard to core i7 10th or 11th generation ones? I love this laptop and want to use it for my day-to-day work but now i think it is kinda slow, specially the CPU, Appreciate your kind help with that, and if you have any recommendation I’m exited to hear it from you,...

Chosen Solution Has anyone replaced the HD Cooling Fan in their 27" Intel iMac? This in reference to an iMac (27-inch Late 2009, 2.66GHz Quad Core i5) ending in serial number in 5PJ. I recently replaced the HDD thinking it was making a lot of noise. I used the proper cable, so my HDD Fan Speeds are all working fine. However, it turns out that the HDD Cooling Fan is what is actually making the noise, even at it’s slowest (1100 RPM) speed....

Chosen Solution I am just wondering if it works without buying a new computer. Edited: I want to know its software and connections work. Actually, yes. You can swap motherboards, but you might have some difficulties with certain software you are using. A2338 A2289 *Remember square one is M1 chip, and rectangle one is Intel chip. Edited: A2159 - 2019 MacBook pro 13 in. @Dan was showing the comparison between 2019 intel and 2020 m1....

Chosen Solution My hp printer works great for printing/ web, but the copy/scan/fax will not work. I was curious if part from my brother MFC-J435W will work and/or fit in my hp to fix the issue i am having! Richelle Salvato it is highly unlikely that parts from a HP will interchange with a Brother printer. There are no interchange guides out so if nothing else you would have to try…....

Chosen Solution My I-phone has 2 small screws at the bottom on each side of the charger receptical. I removed those 2 , but can`t get the screen off to get to the speaker. I have a wax in the speaker problem. have you tried using the suction cup as in any guide linked on the right? it’s a bit safer than the screwdriver method. put middle and ring fingers on the edge of the screen at the uppermost edge where the power button is, while using thumb and index finger to lift suction cup....

Chosen Solution I was looking for cheap 2-in-1s and i found the SmarTab 10.1 windows 10, but it only has 2gb RAM. Is it possible to add RAM to it? StickenMations looking at the specs for this, as well as the motherboard, it is not possible to expand the RAM. It is what it is :-)

Chosen Solution My dad got a regular wireless Xbox comtroller for my son For Christmas. I am trying to figure out if it will work for Xbox one or if we need to exchange. I’m an idiot. The front just says XBOX controller. I finally read the box and it is for XBOX ONE. Thank you. You can try this https://www.youtube.com/watch?v=t10bm-zX… Hope this helps

Chosen Solution Hello! I get an “error 99” when I take pictures with my Canon 18-55mm lens (on a Canon D400). I did some troubleshooting and battery, memory card and shutter seem to work just great. I assume the lens is the one at fault. I noticed that I can successfully take shoots if I set the zoom between 35-55mm, whereas I get “error 99” if I zoom at 18-35mm. Switching between auto and manual focus doesn’t seem to make much of a difference....

Chosen Solution I can receive emails ok but I can’t send them to any one , when I press the send icon it just keeps saying , SIGN KEY ID: I don’t know what this means and I don’t know how to solve it so your help would be much appreciated. Thankyou, Ken wallace. Hi, Here is a link that may be of some help. It explains what is meant by SIGN KEY ID....

Chosen Solution Hi guys, I just swapped my first NAND for a customer because the old one was broken. I received the wifi/bt address with help from a friend in China. It worked after some trial and error but now the compass/gyroscope is acting weird. When I use the camera it thinks it is in landscape when I hold it vertically and vice versa. The compass and level tool are also stuck....