Chosen Solution Norelco rechageable razor battery won t recharge . Needs a new battery . The battery is soldered in and I DON T KNOW how to put a new battery in and where I can get a replacement. I replaced my Norelco shaver batteries about five years ago. It has worked great ever since. I didn’t follow a formal disassembly procedure. I pretty much just took things apart until I got to the battery....
Chosen Solution Is there a way to replace battery without soldering? Thanks :) Rapolas, sorry there is not. The battery must be soldered. Gluing is not going to work ;-) It is not that difficult to learn, just get a few old circuit boards and a regular soldering iron will work for that. Just check guides like this and practice until you are comfortable with it. Hope this helps, good luck....
Chosen Solution Hi folks, I have had pretty bad luck with trying to buy a new aftermarket replacement battery for the Moto G4. They seem to only charge to about 70% and die at 20-50%. I decided to buy a used original Motorola ebay Battery with good reviews and when I got it, I noticed they did probably use a plastic spudger to remove the battery so there are a few marks at the back....
Chosen Solution I have an HTC Merge ADR6325 which is showing a black screen. I decided to replace this with a new LCD screen and a new motherboard by myself but I’m still getting a black screen. So what else can I try? Can anyone help me? Thank you. I recommend inspecting the LCD cables for damage. They are fragile cables and can be damaged during reassembly (e.g., slight tear, pinched cable, damaged pin, etc....
Chosen Solution Hello, I have been using my Macbook Pro for about 2 years now, and I have maintained quite good care of it. Accidentally, I shut my computer lid on a pair of earphones. When I opened it back again, I found out that there were two black spots where the earphones were and colored lines. To test this out, I rapidly changed the screen. The lines that were working changed colors appropriately but it’s not working....
Chosen Solution Apple Repair said the factory installed SSD (Samsung) was unrepairable and would cost $1900 to replace. I purchased a new 256gb OWC Aura SSD for $220 from ifixit.com (I live in New Zealand so shipping is a little more). I installed the new drive into the 2014 Macbook Pro Retina and it is not detected in the Recovery menu (after holding CMD + R on startup). Is not visible in the menu in Disk Utility from Recovery Menu....
Chosen Solution @ulees I want to put a new graphics card in this and I’m not sure what graphics card will work. So does it matter what graphics card I put in it? Will any graphics card work? It currently has its original card installed and I’d like to put a MSI GeForce GT 730 2GB 64bit GDDR5 in it. I know that it’s PCIE 2.0 but what I’ve found is that it will work in PCIE 1....
Chosen Solution Hello, I recently replaced the screen digitizer/lcd on my girlfriends phone,the reason being the digitizer was broken. Since then she has smashed the screen of the new replacement. Is it possible to take the broken digitizer off of the glass of both phones and then put the working digitizer on the non smashed glass? Thank you! It’s fused. You’d have to separate the glass via a heat gun, while trying not to break the digitizer....
Chosen Solution Hi, i have an old macbook pro mid 2010 motherboard issues but i want to upgrade for a motherboard early 2011 with i5 cpu. I see same cable need to be replaced see connectors in pictures in red circle if im wrong or not??? For the rest of cables i think they are all the same for the early 2011 motherboard? please confirm? for lcd connector can it fit or not?...
Chosen Solution So I have way to much Time on my hands so I was wondering if I can put my i7 parts into a 6s backplate and since they have the same dimension I think it is possible to take out the 6s hardware and put in my i7 hardware inside ps I’m really experienced in putting together iPhones Sorry to disappoint you but there would be no way to do that, 6S and 7 are so different that no part of one would fit in the housing of the other....
Chosen Solution I need the isight camera to be off in order to bring my laptop to work, and to disconnect or remove the isight camera is the only way i could. Is there any guide to simply remove the webcam from the laptop and then put it back on when i resign a year later. *Buying the laptop a year later is not acceptable, i need it for work now....
Chosen Solution Hi – I just bought a used Magic Chef wine fridge (2 zone), and while transporting, it seems that the upper fan broke, meaning it won’t turn on now. Any thoughts on the difficulty of this? How do I diagnose the problem? Thanks! Hi, While it is not exactly your problem, here is a link which shows how to get to the fans. It is not very detailed but hopefully it will give you enough information to effect a repair....
Chosen Solution Accidentally dropped my EK-GC120 camera while I was trying to take a photo. Like salt on an open wound, it landed perfectly face down right on the camera lens as it was extended out. And now the lens itself does not close or open properly at all. I’m more than certain it’s damaged permanently and cannot be fixed. My question is… Is there any possible way to replace just the camera lens itself?...
Chosen Solution How come i get this icon? I connected an Ethernet cable to my laptop and it worked, but my laptop used to be wireless. Any solutions? Hi, Check the WiFi driver in the Device Manager. Download and install the latest one. http://support.asus.com/download.aspx?SL… Check is the WiFi device is enabled. Regards.
Chosen Solution I have a sony amp that no sound comes out from it. Do you repair car amplifiers. There are lots of electronics shops across the country that do repairs on car stereo amplifiers. Unfortunately repair costs often start at about $100 and go up from there. So sometimes it’s not cost-effective to have the amp fixed when you can buy a new replacement for around the same price as a repair....
Chosen Solution car is a manual runs slow at start and at other times runs fast. hose leak? You need to inspect all rubber hoses to include the air inlet hose prior to the intake manifold, you have the right idea but even a repair shop will need to do a visual inspection, its common that they get old, dry and crack, get rub marks to the point of leaking air and burnt from hot exhaust, etc....
Chosen Solution can I use an 11’s charging port on a 11 pro? How hard is this fix? Nope, they look nothing like each other. Don’t expect Apple parts to be interchangeable. It’s a pretty complex repair.
Chosen Solution I don’t know what version of ASUS I have, but it is relatively new, a few months ago my computer started booting in BIOS, but I thought nothing of it as I could still boot just fine, just had to press escape to boot, but a few weeks ago my computer wouldn’t boot when I pressed escape, there is also no installed storage drive, as well as no boot options in the boot menu, and the boot priority list is blank....
Chosen Solution Can I upgrade and convert an older HP desktop into a server? How? Yes. But it depends on what you want to use the server for. I have used old computers for that before. Then i used different Linux OS. Your best bet is to upgrade ram to max 2gb, then upgrade the hard drive to an SSD or Hybrid SSD.
Chosen Solution my phone says custom binary blocked by frp and I cannot turn on my phone to the home screen what can I do. Google gsmhosting frp universal bypass. Good luck. Also have to reflash Samsung firmware first as you stuck on custom binary blocker screen. Power volume down and home to boot Odin download mode. Download firmware from sammobile or updating. http://www.sammobile.com/firmwares/ Put the phone in download mode Press Power + Volume down + Menu and Volume up to confirm then Download Samsung Firmware and useodin tool to flash...
