Posts

Chosen Solution Hi,when my washer fills with cold water,it only dribbles out. Hot water is fine….I’ve checked the incoming water and hoses and everything is fine….could an internal valve be faulty? If the washer fills very slowly, the water pressure from the house might be too low. If the pressure is good, try cleaning the screens inside the water inlet valve hose connection ports. If those are clean replace the water inlet valve....

Chosen Solution My Mac mini goes black then I get three beeps in a loop. Seems related to watching videos or playing a browser based game. Apple Store checked RAM which showed okay but maybe not securely in place. Reset and it started normally. After running at home for a time it crashed again. After unplugged and sitting overnight, it started but with everything tinted purple. Restart gave a normal screen but went black with beeps in a loop again when attempting to watch a video....

Chosen Solution I got stuck… someone might help me. Iphone 6s water damaged, despite the short described below, the iphone boots up until “Unable to activate”, then will invite you to shutdown. The board has been thoroughly cleaned. There’s a batery drain, before powering up there’s a constant drain of 200mA. but nothing gets hot. After powering up requires around 400mA and most of the IC’s gets substantially hot to the touch....

Chosen Solution Hi, Today I did a backplate replacement for a friend, during reassembly I tried to turn it on before I put the 2 screws back in. It didn’t turn on, but it started getting warm and smelled wierd, I opened it up and there was a yellow patch where the black bit of the battery had scraped off. We put the original backplate back on and did the screws up tight....

Chosen Solution I have an original game boy that when turned on, the LED is red and you can hear whatever game is inserted, but no visual on the lcd screen. The contrast switch has no effect. I would check to see if the pot that controls the contrast is functional with a multimeter. If it isn’t, replace it and see if that solves the issue. I would also check all components on the PCBs for signs of damage, e....

Chosen Solution Hello, I had dropped my iPhone 5 for a small bed (a fall of about 50 centimeters). After that, my iPhone will not turn but: 1-When I plug Charger / PC: iPhone is on Boot Loop (Apple Logo and Apple logo and black screen and so on to infinity …) 2-When I tried to restore iTunes shows me the error 21 (even in DFU mode) Now the iPhone is locked to the recovery mode....

Chosen Solution Does anyone know how to tear down a big blue party speaker? It fell of a table and the one of the speakers sounds blown and wanted to verify but I don’t know how to get to the speaker to see. Can someone help? I finally put together a battery replacement guide and a partial tear down: Brookstone Big Blue Party/360 Speaker Battery Replacement Bottom screws and a sample of the plugs....

Chosen Solution I am trying to get out a screw in order to replace the battery but I am having no luck, even tried the rubber band method. any help? This guide How to Remove a Stripped Screw plus the Restart Project Wiki page at https://wiki.restarters.net/Rescuing_Dam… represent the sum total of human knowledge on the subject. Then it’s just down to your skill, ingenuity and perseverence.

Chosen Solution I downloaded Adobe Illustrator to learn graphic designing, but the software soon crashed because there is not enough memory on my pc. An Adobe expert verified the issue and told me I have to increase the RAM to 16GB. Is it possible? Do I need to go to a repair computer or is there another way? How much does it cost? Hi Chiara, Unfortunately these machine are not upgradable....

Chosen Solution This question is pretty self explanatory, can I require a password to shut my computer down? I have several important processes running at most times and people will sometimes shut it down. Put a note on it that says, “DO NOT TOUCH OR SHUT DOWN”. You can also use the Security and Privacy setting in System preferences to require entering a password after different amounts of time left unattended....

Chosen Solution I recently bought an SAMSUNG 860 EVO Series 2.5" 2TB SATA III 3D NAND Internal Solid State Drive (SSD) on sale, was wondering if it was compatible with my Macbook Pro 13” Early 2015? If so, would I need to buy another other accessories such as cables? Looks like I currently have a 500 GB SSD with an Apple SSD Controller Apple SSD Controller: Vendor: Apple Product: SSD Controller Physical Interconnect: PCI Link Width: x4 Link Speed: 5....

Chosen Solution when taking shot, camera can’t read memory card, i replaced several cards but did not work The memory card must be “formatted”. The camera can not read from, or write to, a card that has not been formatted first. The quickest way to format a memory card is to use the camera’s built-in formatting utility: Press the [MENU] buttonUse the [<] or [>] buttons to select the first Tools tab in the menuUse the [up] or [down] buttons to select the “Format Card” item, confirm with [SET] buttonYou get the “Format Card” screen, use the [>] button to select “OK”, then press [SET] and wait for the formatting process to complete....

Chosen Solution The FreeFlight Mini app doesn’t seem to recognize my Parrot Hydrofoil Orak and will not connect through bluetooth. Any suggestions? Hey Matt, Chances are that this is a result of outdated software. A quick fix would be to confirm you have the latest version of the FreeFlight Mini application on your smartphone. If you do and there is still a failed connection then there is probably an outdated version of the firmware for the minidrone itself....

Chosen Solution Can somebody help me? My problem is the camera won’t save Images on my SD card, I have inserted the SD card, but when I take a picture, the picture is not saved on the SD card, what do you think the solution is? Ansrattlexnake [Tagdzsi] first you have to make sure that you have a card that is compatible with your camera. Next make sure that it is not write protected....

Chosen Solution I’m assuming the answer is yes, but I’m wondering how safe it is to purchase a water damaged iPhone 6 so I can use the screen to replace a cracked one. The seller claims the iPhone was sitting the jacket pocket while on a hike through the rain. When they turned it on, it turned on for a brief moment, but then shut down never to turn on again....

Chosen Solution Is it possible to apply OCA without a lamination machine? I am going to be doing a glass only repair on an S7 Edge and I heard LOCA can cause issues with OLED displays. Also I heard that because of the edge display it is much easier for LOCA to slip under the display and go in between the layers. I bought an S7 Edge glass only kit and it came with two sheets of OCA, a bottle of LOCA and a UV light so I can do either way but apparently OCA sheets are the better option....

Chosen Solution Can you please tell me or perhaps post a picture as to where the one lone silver screw goes in this laptop? I spilled my coffee on it and tried to take it apart to clean but I cannot remember where this silver screw goes! Hi @cinnamondolce , This video may be of some help to you. It shows the complete dis-assembly of your model laptop. Unfortunately the colour of the screws cannot be seen....

Chosen Solution Yes I know….I promise its not lint. Somehow, my parents have managed to do something to the charge port. The cable will not fit in order to charge it. Everywhere I have looked on the internet talks about clearing out lint. There is none. The charge cable simply does not fit completely. Vertically it it fine, but horizontally, it does not fit. I thought there might be something stuck in there so I have inspected it completely....

Chosen Solution I was looking to buy the charging port replacement for my iphone 5s, but it looks different from the one i have currently any suggestions? it seems to be missing the mounts to screw the home button connector down Update (02/07/2016) there If you mean the silver plate that is under the connector for the home button, you have to remove it off the old one and put it on the new one....

Chosen Solution I took my iMac to the Apple Store. They ran diagnostics to test my system and the video card failed. It was too expensive to fix there, so I took it apart to take the video card out, and there was a loose chip at the bottom of the iMac! Not attached to anything. Does anyone know if this would be from the video card or possibly the logic board?...