Chosen Solution I could not get part for my KM210 speed knob that was broken, now it is on high speed when I turn on the power. Can I use a voltage regulator to control my speed and which type? I don’t think that would be a good idea. If it’s just the knob that missing, please post a photo of the shaft so maybe we can find a knob that will adapt to you machine, such as one of these: https://www....
Chosen Solution So, I recently purchased a macbook unibody from late 2009. It didn’t come with the bottom aluminum case. I would definitely purchase it, but here in Brazil I just can’t find one available at a fair price. Would bottom cases from other macbooks fit here? Specifically, the A1278, which is also 13” and I found for sale at a very reasonable price. The A1278 ran from 2009-2012. The bottom cases are interchangeable, so get it....
Chosen Solution can you play movies on a paperwhite Not really… The issue is the way this display technology works is not fast enough for movies. Besides the Kindle with this display was designed as a reader only. It can do small animated gifs
Chosen Solution Can you swap the mainboard in the 64gb 6gb (slate grey) version of the phone, with the mainboard from a 128gb 8gb (midnight black) version of the phone. Will that work? Yes you should be able to but be careful. They may come from a donor device that could be carrier locked or have google FRP.
Chosen Solution how do i reinstall windows on my hp pavilion 551w . when i turn the compter on it boots up to a point where it shows a blank screen with a cursor blinking. it does not go any further. im trying to install windows on the hard drive. thank you HP Pavilion 551w Do you have the original disk? If so put the disk in the CD/DVD drive and turn the computer on....
Chosen Solution I was using my laptop on a zoom meeting, when it said that it had 10% remaining. I plugged it in and went on with the meeting. Shortly later the device went blank and shut off. I checked all of the connections on the charger and it still did not even show any indicating lights. Is there a good way to safely check the charger functionality? Or is is something else....
Chosen Solution I updated my MacBook Pro 2011 with MacOS Mojave and was trying to apply the update today, and I’m surprised no audio device on my system, any solution please? Note! My system is not supported in MacOS Mojave I installed it with this method: How to install macOS Mojave on unsupported mac using DosDude patcher Did you install the correct patches on the patch updater? I have a hunch that you forgot to install a necescery patch....
Chosen Solution Ok so I’ve decided to salvage my MacBook Pro it has been broken for about a year. When I hook it up to a screen it is fine and when I shine a light through it you can see it. I have tried resets etc. Any help would be great! It may be a backlight fuse failure on the logic board. If that’s the case it should be replaced but requires soldering skills and a very good magnifier or microscope....
Chosen Solution Washing machine - Front loading 6kg - electronically controlled I am seeking help regarding the a problem described in the next para in my front load washer. The washer is about 6 year old. I am using the word ‘drum’ for referring to the washing drum which is composed of immovable outside portion and the inside portion both. The inside-rotating-portion of the drum is connected to a spoked sort of a ‘wheel’ at the back of the drum....
Chosen Solution What is the replacement battery information for the TDK 360 Bluetooth speaker? http://www.ebay.com/itm/Replacement-Batt… The above link lists the manufacturer’s Part number as EU-BT00003300-N17. You can use this guide for replacement procedures: TDK Life on Record Trek 360 Battery Replacement Here’s how to install it: TDK Life on Record Trek 360 Battery Replacement Here’s the battery: http://www.ebay.com/itm/OEM-Replacement-… TDK Life on Record A26 Battery Replacement
Chosen Solution I recently bought a pair of Beatsx earphones. I have charged them, updated software, tried to find if there are any loose cables, attempted a reset on them and still they will not turn on. I know they work because when they are attached to the lightning cable the LED’s light up. It’s when i take it off charge when the problems start. They will not turn on. I hold down the volume down and power button for 10 seconds and it doesnt change anything....
Chosen Solution iPad won’t turn on. If pushed u get some fuzzy lines then just a black screen, and it won’t reboot holding both buttons down. Has anyone any ideas ??? Hi Mark Thanks for the tips, but no luck. You can just see the time though the very colourful lines. Carnt get it to vibrate. And sometimes it has black corners. Might have to drop it in to the fixers....
Chosen Solution My MBP suddenly doesn’t turn on properly. The computer turns on, but to a blank screen. I hear the startup chime and the HD whirring. Also, after a few seconds the keyboard lights up. I took out the HD for testing, and everything looks fine. Any ideas? Could be a GPU failure. The MBPs A1226 and A1260 use the problematic NVIDIA GeForce 8600M GT graphic card. If you don’t have video on an external monitor contact Apple cause your computer could be repaired free of charge via the Apple special Nvidia replacement program....
Chosen Solution My camera wont turn on. I already read the troubleshooting page. When I charge it it blinks red. It doesn’t matter how long i charge it. I have purchased a new charger and a new battery. Nothing. Samantha Bazant , Look into the charge port with a flashlight, look for dust/lint/etc. and blow the port out or very carefully pick it out. Also look for any damaged terminals if you see one bent very carefully straighten it with a tooth pick....
Chosen Solution Hi guys. Today I managed to snap my headphone cable in half. The headphones in question are the B&O form 2i. Iv looked around the forum but my problem is unique as the cable has snapped exactly where the cable from the right and left speakers join into one cable. How could I fix this? Please help. First remove the little plastic piece where the connections split. Strip both ends of the wire, and on the end with the jack, use a multimeter on continuity mode to figure out which wire is left, right and ground....
Chosen Solution My daughter dropped her Atrix (first release) in the sink full of water. She pulled it out and let it dry. Then she did something dumb she plugged the charger into it!? I do a lot of repairs on various electronics Voicemail systems,PBX systems and key telephone sets. I am somewhat savy wih electronics. I do solder but not on the micro level. Is there any hope for this phone?...
Chosen Solution Hi my trackpad has to be clicked down really hard before it selects anything. I was wondering if there is a version of the retina click (All over) version of the trackpad that would work with the mid 2012 non retina macbook pro 13". Sorry no, you can’t swap out the trackpad for a different type. So lets see if we can fix your problem. As it turns out there is an adjustment you can make to fix the click depression and if that doesn’t work you can replace the trackpad with a new unit....
Chosen Solution Kenmore Elite (over the range) Microwave (model 721.88512900. Can I use a higher watt bulb ? Original bulb I believe was a 20W. Kenmore could not answer the question. Wanted to sell me a $26 bulb + shipping Hi @bh99 , I wouldn’t risk it. The lamp has been selected to work at the temperatures that may be present in the microwave. Also using a higher wattage globe means that more current is needed and this may cause problems with the lamp’s power supply circuit on the control board if it has been designed for a 25W bulb e....
Chosen Solution Hi guys, I have a problem with my iPhone 5c (16gb). After replacing battery and remove and put again Logicboard, I switched it on and went in recovery mode. Trying to restore it by itunes, it gives me error (1). I tried to put it in DFU, but it doesn’t work. Do you have some advice? Thank you so much and sorry for not so good english. P.s. I tried to use programs like iPhone Data Recovery, but clicking restart the device enters in logo loop....
Chosen Solution This happened to me twice. The first time I was backing up and the car sped up while I was applying the brakes. I thought I did something wrong. The second time it happened, I knew I did nothing to cause the car to accelerate while I was backing up. I have videos of both incidents from a surveillance camera and it clearly shows that the car was backing up slowly when all of a sudden it accelerated much faster....
