Posts

Chosen Solution I am looking into the heatgun, blocking the vents(wow, that will do MORE damage then good), reballing, replacing the board if I get the right donor I have asked about the best way to implement data removal separately and actually made it understandable How I deal with these laptops is very simple, clean the heatsink, get Artic Silver 5, replace the thermal pads on these ticking death clocks to keep them around longer(I get it, I CHOOSE to take these) I will do this on ANY NVIDIA plagued laptop I need to fix to keep them from dying again as quick(I have worked on a friend’s with a reflow, it lasted 2 years before it died, better then a year and then it died before)...

Chosen Solution front camera is working and not rear one it comes black screen when i open it and same camera is working on other phone. Deepak, use a magnifying glass to look at the back camera connector on the board, and around it. Do you see anything missing, torn, damaged, corroded? If you do see something damaged/missing, it needs to be replaced/repaired. If not, clean the connector with a cotton swab dipped in 90%+ isopropyl alcohol, reseat the camera, reboot your iPhone like craigad24 suggested, and try the camera again....

Chosen Solution Do you have to remove the dash to get to the blower motor on 1997 dodge dakota? r harris, yes you do. here is more about that. try this from the service manual: “REMOVAL WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS,DISABLE THE AIRBAG SYSTEM BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. DISCONNECT AND ISOLATE THE BATTERY NEGATIVE (GROUND) CABLE, THEN WAIT TWO MINUTES FOR THE AIRBAG SYSTEM CAPACITOR TO DISCHARGE BEFORE PERFORMING FURTHER DIAGNOSIS OR SERVICE....

Chosen Solution I got my PS4 Pro in April brand new. It won’t read discs properly. I have a regular PS4 as well and all our discs don’t read properly on the pro. The game’s loading screen pulls up like the game is about to start, but then I get a “cannot recognize disc" error. It is obviously reading the disc or how else would the game’s loading screen pull up?...

Chosen Solution So i have a samsung galaxy s7 that thanks to my ex changing the password and pattern before she left, got formatted because i was unable to reset the password or pattern. I have audios of me and my son singing on it that i really need to get back. I am so desperate i would even buy software. Please how can i recover those deleted files? is there a way?...

Chosen Solution Is my Imac compatible with the newer 802.11n cards? Thanks. Yes you can. There is a Sonnet Aria Extreme N PCIe card available which is a straight swap for the Airport Extreme card in your Mac. It will give you N capabilities. But if you have a Core 2 Duo CPU in your machine, you can download an N enabler from Apple which will do the same (for $1....

Chosen Solution I’ve tried to order roughly 5 batteries now, ranging from different buyers and APNs, 616-0718, 0720, 0721, 0728, all of them do not even light up the screen as the old 616-0722 battery does (which has a low voltage, unable to boot, shows a please charge screen with lightning cable). I have tested with other charging ports as well. The problem is I cannot purchase another 0722, no matter where I try, ever after I spend 100$ on a specific eBay advert that claims to only have that APN....

Chosen Solution So my remote had the entire left handle sheared off, but it still works so im gonna try to fix the damage, but i cant seem to get the vibrators out as the guides appear to have different models (if that’s even a thing idk) and so im kinda stick. Appeceriate help.if possible First thing I usually check when I am experiencing difficulties with any repair is how the part looks to be secured....

Chosen Solution can the off and on botton stop working I’ve seen a defective power button on an iMac only once. Much more likely a power supply issue. Look on the bottom of the machine and tell us what you have so we can get you to the correct guides and how to read the diagnostic LEDs.

Chosen Solution I want To buy a Verizon logic board and put it in a Australian iPhone 5s . but I don’t know if it will fit in probably Those logic boards are most likely going to be network locked to that service provider. Are you going to use a different service provider?

Chosen Solution i have craked screen on my ipod nano the square version please can you fix it jack, are you looking for somebody to fix it for you? Anyhow, here are the manuals that allow YOU to fix it.iPod Nano Repair just pick whatever model iPod you have and look for the change display or similar to find the instructions. Good Luck to you

Chosen Solution While riding my board, or just spinning the wheels, I can hear a clicking sound coming from from my rear wheels. It is most likely the pulley bearings or the skateboard bearings that are making the sound. First, try cleaning the bearings. If the sounds continues, you’ll need to replace the bearings. Refer to the troubleshooting page for more help, or check out one of the repair guides. Boosted Board 1st Generation Troubleshooting...

Chosen Solution car has been running fine went to start it no power to coils checked all fuses ok . You may have a bad ignition module. You can check it by removing the affected ignition coil, also remove the fuel injector fuse. Connect a test lamp across the two terminals on the ignition module. Take a look at the test light while you crank the engine over. The light should be flashing while you crank it....

Chosen Solution The new update bricks the iPhone 7 and up that have third party screens but are Ifixit screens apple screens but with new glass I’m asking this because I can’t get a clear answer I haven’t had an issue with the screens bricking due to an update. Not on an iPhone 7,8,X ect. If this happens Apple will be in trouble. This has happened before along with other issues after an update....

Chosen Solution I have been hammering away at this Marantz receiver over the past couple of days. I had it working flawlessly. Then I turned it off and back on. Now a problem has arisen. If I turn it all the way up and turn it on, the audio is extremely quiet and if I turn the volume knob, the audio just dies completely. Any suggestions? I would assume that the audio is being transmitted to the speakers at a low setting, but it is so quiet you wouldn’t be able to hear it....

Chosen Solution Hi, my late 2009 iMac 27" is killing me. Display goes black 10 times a day. When I hold a flashlight to the screen I can see stuff on the screen. External Monitor works fine. Regarding to some other articles on ifixit, the backlightboard should be damaged. So i ordered one from the US (I´m in germany) and replaced the old one… same failure crying loud. Do you think i should change the backlight cable also?...

Chosen Solution Hello, My wife spilled the smallest amount of tea on her a1425 Macbook Pro Retina from late 2012. After letting it dry she tried to see if the laptop was still working. At first it looked promising because the system started up normally and everything was running without any noticeable difference until she tried to run in from the battery. As soon as the MagSafe was disconnected the unit shut off immediately....

Chosen Solution The display was cracked on the left bottom but fully working. After I remove it and put the new battery to test, I plug in the display and this happen to the display. The connectors seems to be ok. I dont know what happen if I did everything normal. What happens in here? thanks You have a faulty screen. You will need to replace it.

Chosen Solution What is the size and configuration of mower belt of model #38618x92B 11HP/38"? cedrichinkson. The belt you need is part number item description 037X63MA Blade Drive Belt 38"SD Deck (replaces 37x63) and here is the diagram. Good Luck That doesn’t match the model number on the decal. What is going on with that? Does this belt fit on all 38" mowers or something?

Chosen Solution Hello, A few seconds after I wakeup my mac the screen turns to black followed by a glitchy screen (random colors). This happens once or twice, nearly every time. I previously had the issue that the mac went to sleep randomly after the wakeup. It has been a few days since I had that issue. The problems are probably related. Any ideas? Thanks, Dennis Sounds like a SMC related issue....