Posts

Chosen Solution after opening the compartment and releasing the lever inside the battery does not pop out as it used to and it can not be removed. how can it be removed? thanks very much for your help! @sbba1618 make sure that the locking mechanism is fully engaged. Sometimes it helps to push down a bit on the battery and see if that releases it. If that does not work, use a pair of hemostats or tweezers and try to pull it out with the release lever engaged....

Chosen Solution Hello, I have two htc One A9s and the batterys are nearly dead all the time. I wanna know, what replacement battery is the best, and how I should do the replacement, because i never opened a phone the “normal” way before. Are there some things, that could easly break and i should have for the repair, or is it only a replacement battery, but from wich source? Thank you a lot!...

Chosen Solution My micromax Q413 is dying at 80% batt itself.Changed the battery no use….. Im just able to use 20~30 perc of my batt…. Any solution please If you’re sure that it’s not the battery as you have mentioned you changed the battery, then try to figure it out by going in the settings and selecting Battery option …what’s consuming your battery. Calibrated your battery it should solve your problem....

Chosen Solution Just replaced my battery The phone is not turning on, though I can feel some heat while it is on charge. My PC does recognize the device You may have damaged the backlight circuit on the logic board if you disconnected the screen without disconnecting the battery first. To be certain, shine a bright flashlight on the screen when you connect it to iTunes. If you see a dim image, then your backlight circuit is blown and will require a micro-soldering solution....

Chosen Solution While disconnecting the old battery the the copper for the neg battery ribbon connection was rip off, there is a place I can get that connection solder too? This is a temporary fix, as all i need it to get it to power on in order to take data off. Depending on the condition of the flex on the battery, you could try to scrape it a bit to expose some copper....

Chosen Solution We had a small accident while playing, and popped the right lens clean out. What’s the best glue to reattach it without melting the plastic? Red tape is the answer to everything: [linked product missing or disabled: IF317-071-2] Though a quick glance at the teardown suggest there might not be enough room for red tape, so black tape may have to do: [linked product missing or disabled: IF145-283-1] Black tape is stickier but less permanent....

Chosen Solution Through some sort of blunt trauma in my bag, the bottom left corner of the trackpad (where left click would be on normal trackpad) has sunken into the body of the Macbook. Although the click still works, it is a bit temperamental, and tap to click still works, although it has made click and drag difficult. I am most worried about it eventually breaking from being in the wrong place in the body....

Chosen Solution Broken L side hinge, screen turned white, haven’t synced to my timecapsule in a while. How do I get my info off? Assuming that your display is the only problem, you should be able to connect your computer to an external display so you can see what you’re doing, and then back it up normally. Plug your time capsule in and boot the machine. Time machine should automatically back it up even if you can’t see the screen....

Chosen Solution My camera become blur after drop in water..at first okay..but now it blur..how to repair? @nano95 you did not tell us if you dealt with the water damage. Since it worked first but now does not work properly, it stands to reason that it is either starting to show signs from the water damage or that your phone is starting to fail due to corrosion etc. If you have not dealt with the water damage then you do want to look at it now....

Chosen Solution Okay so I don’t have much money to pay for a new computer so I want to try to make it better myself. I’m not really a computer wiz but i am the son of an electrician so i know my way around wires, and i have messed with some(2) computers before. I was wondering if i could buy the 661-5937 logic board to replace my 661-5306 logic board (for the better processing power with the intel chip)....

Chosen Solution Hi guys! I was wondering if I could upgrade my iPhone 6 by putting a 12MP 6S camera in it. Will it work? No the 6s camera can’t be put in a iPhone 6. If you want the 12 mp get the iPhone 6s. :) Well, you can, if you weld the connections of the 6 camera flex cable with the 6s camera sensor, did it and kinda works....

Chosen Solution I broke the glass. Can I replace just it by myself or do I need to do the whole screen? I wouldn’t mess around with the glass. You need special equipment and skill to do just the glass. I would just replace the complete screen. What is wrong with it,

Chosen Solution can I repair these cables? lucasmano96 I am certain you can. Since you did not tell us which wires and why you think you need to repair those, check the guides and see how the wires are attached to the inside of your headset Astro A40 TR Repair

Chosen Solution I broke a connector replacing the keyboard on my 13” Mid 2012 MacBook Pro. I will replace the logic board, but what is the fastest compatible replacement? You only have two options: MacBook Pro 13" Unibody (Mid 2012) 2.5 GHz Logic BoardMacBook Pro 13" Unibody (Mid 2012) 2.9 GHz Logic Board

Chosen Solution My MacBook Core 2 Duo late 2006 has a maximum memory of 2GB, but I would like to go higher than than. Can I? Apple MacBook “Core 2 Duo” 2.0 13" (Black) Specs Identifiers: Late 2006 - MA701LL/A - MacBook2,1 - A1181 - 2121 *Apple officially supports 2 GB of RAM, but third-parties have been “unofficially” able to upgrade it to 3 GB or 4 GB of RAM (it can hold 4 GB but cannot fully utilize the memory beyond 3 GB due to the same limitation that impacts the “Late 2006” MacBook Pro line)....

Chosen Solution An apple worker told me I couldn’t get a replacement of my iPhone 6s cuz one of the prongs in my charging port showed signs of water damaged. How can I get that out to clean it up and see if it charges again? Just get the charger port replaced. It’s really hard (well pretty much impossible) to clean the inside of a lightning port for liquid damage. In some cases it may be more than just the charging port damaged so I recommend getting the phone opened up and inspected for liquid damage....

Chosen Solution Hi I have the Samsung NP3–e5a-S07AU Notebook and was wondering if this can be upgraded to SSD Thanks Sean seanwp2 if your machine is a Samsung NP300e5a then you can simply remove the hard drive and replace it with a SSD as @danekjohnson has said it will greatly increase you boot speed and you will defiantly notice better battery life. If however the – in the model number you showed above refer to some other model then I cannot say with certainty that this will work....

Chosen Solution Im looking for a new phone, but then I got curios for something. I asked my self can u buy two iPhones of the same kind. Then find out what is wrong with each of them and then use the working parts from one the phones, and replace them with the non-working parts of the other phone? Can u do it? And how do u find out with parts aren’t working and with are?...

Chosen Solution The rubber ring that is on the front of the washer has lots of mold….want to replace it…it was bought in 2007. @kyfiuk I guess you are referring to the washer door gasket. Check this video to see how to change it. The part is available on here as well as many other places. The video from @kyfiuk didn’t help. it’s not for my model, I don’t have a dispensing tube, also I was told I do not have to remove the top....

Chosen Solution Just bought a2000 Honda civic a few weeks ago and last week it started shaking pretty bad when it started and then when it stopped but now it’s shaking even worst and it turns off randomly please any ideas what could be wrong? Rosa is the service engine light on ? If so go to a pep boys or napa auto center and have the codes read. this will give you a really good idea as to what the problem is ....