Chosen Solution I’ve got a problem with an Ipad 2 (model A1395, 64GB). A few months ago the charger is was connected to exploded. Since then I have only been able to charge the device by connecting it to a charger whilst powered up, then power down the device. It doesn’t recognize the charger when it is powered and doesn’t charge (I’ve left it powered up and connected to a charger and the charge drops over time)....
Chosen Solution will the replacement lcd for SM-G925F work on my SM-G925W8? mushfiq20 , could not find much info. on LCD only for SM-G925F/SM-G925W8, did find a few links all stating that the display assy.’s are compatible. So with this info. I would think the LCD’s would be compatible also. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. https://www.etradesupply.com/samsung-gal… http://www.ebay.ca/itm/Black-New-Samsung…
Chosen Solution When a charger is connected to a phone while in use: the charger current goes directly to the battery and from the battery to the rest of the phone? There in no direct connection from the charger to non-battery modules like screen and cpu. Or some of the current goes to the battery to get charged and the rest of the current goes directly to the rest of the phone....
Chosen Solution Hi, I removed the motor on my water damaged evo because it would vibrate nonstop. Now the phone functions fine minus vibration. Any idea where I could get a new motor? Cody, you might want to try here
Chosen Solution I will be as brief as possible. I use a mobility scooter, EWheels EW10. I only have 190 miles on the scooter. I have replaced the incandescent headlight twice. I would like to replace it with an LED. The current bulb is a bayonet type base(similar to the 1157 tail/brake light) with two filaments for high and low beam. The bulb is 12 volts, 35 watts. It is not much bigger than the 1157....
Chosen Solution So we got a nice new camera, with projector built in and everything, but it got drowned. Now it takes crappy pictures and the lcd is a little funky. Anyway, the projector still works great. Does anyone think it would be possible to wire a video in into it and make a mini projector capable of up to 40 in pictures? I think this would be awesome, if possible....
Chosen Solution Got an iPhone 6s with some water damage. Managed to get back everything to working order except for back camera. Since it was missing PP2V85 I removed U3200 which had suffered a short with VccMain. Unfortunately CAM_EXT_LDO_EN seems to be missing too, although the pin is shiny and undamaged. Does CAM_EXT_LDO_EN show up only when camera cable is connected or should I just say goodbye to the main camera ?...
Chosen Solution I Phone 3 GS - water damaged so i replaced the touch screen and the battery with original manufacturer parts. It worked for about 2 weeks just fine then all of a sudden the backlight will come on for a split second then back off. If you shine a bright light on the screen you can see the display with the apps on it. How can I fix that?...
Chosen Solution A few weeks ago, I decided to replace my macbook’s battery - after 5ish years, the only thing about this laptop (the best laptop ever made) was the battery life drained quickly. I ordered a battery + kit from iFixit, and replaced the battery. I conditioned the battery, but every time it discharged it would jump from above 50% battery to 7% battery, then die shortly after (i.e. a very discontinuous discharge)....
Chosen Solution How do I disconnect the battery? Hi, here are a couple of links which may be of some help. This link shows how to open an X202e laptop. At 2:26 -2:51 minutes into the video the battery connector is being disconnected. (It does not show the removal of the battery). https://www.youtube.com/watch?v=Lqx0-g3U… This link shows the removal of the battery starting at 3:40 minutes into the video and it is removed by 4:23 minutes....
Chosen Solution I dropped my Z3 (in an otterbox) in some water yesterday and it seemed to be doing fine for a few hours, but then it started acting as if the power button was being constantly held down, which led me to believe that there was water closing the circuit that the button usually would. Is there any good way to get the water/moisture out from near the power button without completely taking the phone apart?...
Chosen Solution I change the screen, but still black. If I put on the light I can see all things. Try the original screen (if it was cracked, but the picture was working). If it is still dark, you have likely blown the fuse on the board, or a filter. I am not familiar with this model in particular, but you would need to get a schematic and board view if thats the case, find the backlight fuse, check continuity and replace it if power is not flowing through it....
Chosen Solution Okay, so I know there’s other threads describing this issue - but nothing has helped me thus far. I’ve got a MacBook Pro 13" Mid 2012 that worked perfectly until about a week ago. Suddenly, when I started it, the blinking question mark folder appeared. This is what I’ve done so far (but nothing has helped me): Bought a new SATA cable and got rid of the old oneThe system drive (SSD) works with a USB cabinet, also worked fine after formatted in a different computer - however not recognized at all in my systemTried with another SSD drive with Mac OS-X installed - not recognizedTried to boot with a Mac OS-X Installation USB stick, and a different SSD drive - not recognized in Disk UtilityTried all kinds of different commandos - CMD+R, CMD+ALT+P+R etc....
Chosen Solution I disassembled my laptop in order to replace the thermal paste, and ended up breaking a ribbon. The purpose of it is still not clear to me. I am yet to face any issues in my normal use of the laptop, and everything seems to be working fine. I even ran the hardware diagnostics within the Mac, and even it did not fetch any error codes, and said everything is fine hardware wise....
Chosen Solution My question is exactly how do you know when you need to replace the entire LCD screen or just the digitizer? I purchased my galaxy tab 3 on eBay over a year ago. It was cheap as the screen had a crack but it worked purfectly from day one. Originally it was ment to be mine only as I had also purchased a tab 2 which wasn’t damaged at all for my wife and a cheap off brand tablet for my little girl....
Chosen Solution I have a vizio e550i-ao with a busted screen. Are the replacement screens the same? I can find a repkacement 55inch screen but for another model. Please advise. Hi, Check the part number printed on the back your LCD panel. The replacement LCD screen and yours need to have matching numbers to be totally sure that the replacement will work. If not there may be discrepancies between the connections....
Chosen Solution I got a Macbook Pro 2 years ago and last April it started not booting up properly, it just showed an icon of a folder with a question mark and then shutting down. I took it to a repair shop (not on an Apple Store since I was out of warranty already) and they said that the HDD Connector/Cable was broken, and that it needed to be replaced. I didnt replace it yet then because I didnt have the money to replace it....
Chosen Solution ‘’this camera is very special to me and if there is anyway I can watch my mothers tapes again I would love that. We moved from Montana to North Carolina so maybe it’s something with water humidity or something. Please help me out. Here is a video of what is happening. yes a tape is inside still.’' This is a relatively common problem and will require some dis-assembly of the camera to resolve....
Chosen Solution Can i swap out the existing hard drive in my Apple Airport extreme base station / Time Machine - 500GB disc with a larger 2 TB disc? Can you do a tear down of this unit to see if this is possible and if any other parts are replaceable? Thanks! Are you sure do don’t mean Time Capsule? That is an Airport Extreme with built in hard drive. There is a good guide here: Apple Time Capsule Model A1302 Hard Drive Replacement and depending on your model you can change the hard drive up to 3TB....
Chosen Solution Because of spill damage i need to replace the keyboard. is there a replacement available for this model - 13" macbook unibody, mid 2010, or do i have to buy the full top case? Thanks Yes - but it’s not an easy repair. It might be faster and easier for a newby DIY to just replace the entire top case. Purchase the required tools - here or elsewhere, any job is easier when you have the proper tools....
