Posts

Chosen Solution Hello Everyone, I was just playing around with my macbook 4,1 and decided to do Apple Hardware Test. Which resulted in failure code: 4SNS/1/40000001: VG0C-0.070 I did some research and seem to indicate a sensor failure on the logic board. Though I have not had any no problems with this laptop for the last 8months(2nd owner) I was wondering if anyone could shed some more light on this error code and if I should be concerned Thanks...

Chosen Solution I was wondering if I get my iPhone fixed and then get this error 53 from not having it fixed by apple directly if i will be covered. If you mean to have it repaired by someone other than Apple and then expect Apple to warranty the repair I feel you will be disappointed. The expectation is unreasonable. If it is under warranty now, by Apple, have them honor the warranty....

Chosen Solution Replaced cracked screen with IFIXIT replacement complete screen, also replaced battery, adhesive strips, and rear camera while it was apart. After replacement, the auto dimming feature does not work. I have to manually adjust the brightness. Yes the auto dim feature has been turned on and off with no change. If the replacement screen already came with a front camera and other parts pre-installed try using the front camera assembly from the old screen if you still have it as the front cam pre-installed may be faulty....

Chosen Solution I have an LG 49ub850v led tv. I sent the tv to a local repairman. He said that the problem is the mainboard. On mainboard there is a red light near LD2300 component. What is the problem? Any solution that i can repair by myself? Can you help me? Hi @trgyergun , Without a schematic for the mainboard it will be very difficult unless there is something obvious e....

Chosen Solution I disassembled and cleaned the dust from a WORKING G4 iMac 700 Mhz with 15" monitor. Now I get a black screen on startup. After the startup chime a pure tone sounds three times. Then the monitor light blinks a repeating pattern: once long, 3 times medium and 1 brief flash. I re-opened up the case and found no loose connections. This is not a backlight problem. The tones and flashes must mean something....

Chosen Solution My macbook pro 2012 turns on but shows no display and all i can do is see how much battery life it has and hear it rev up the fan like a engine, i can only hear the fan revving up would that mean my logic board is stuffed? Connect the power adapter to the Mac. On the MacBook / Pro’s keyboard, hold down the Shift+Control+Option keys and the Power button at the same time....

Chosen Solution my laptop has the black screen of death…. and it beeps anytime i plug or unplug it from the power source.. Daniel, Google search your make and model#, # of beeps, black screen. I hope this helped you out, if so let me know by pressing the helpful button.

Chosen Solution Can the charging port on a GoPro 3 be repaired or replaced @rappin9 ,Rodney, The charging port on a GoPro 3 can be repaired or replaced. This is really not a repair for the inexperienced because the charge port for your device is soldered to the mother board and the heat generated could cause further damage if not very careful. I will post a link to a tear down guide to get you inside the GoPro Hero3 to check the charge port and will also post a link showing what is involved in repairing/replacing a mini USB attached to the board....

Chosen Solution Hi, hope the format is right. I’ve had my S8+ since 2017 and had no issues other than two small dead pixels until last month. No warranty anymore unfortunately. Firstly, my charging port 95% of type-C cables, not recognising them so I’ve been using wireless charging – bit of an inconvenience but not that big of a deal. and manageable. However, I’ve dropped my phone two weeks ago or so, everything was fine until yesterday (other than slight cosmetic damage)....

Chosen Solution by the years the Epson C1100 printer get it more difficult to print. At this moment it will only print one paper at the time and by doing so, it first crumbles the paper before printing it. (see https://www.youtube.com/watch?v=tygyUDK2… ) Printing multiple pages results in paper yam at the pickup point. Problem is, everything looks fine. Nothing is broken of dirty. Does anyone know where to start fixing this printer?...

Chosen Solution the mother board and battery were damaged by moisture and i want to get the data form the hard drive. is there connector that i can get to connect it with my other external drives or in a mac pro tower? You can place your drive into an OWC Envoy enclosure to read it on another Mac. OWC Envoy - 0 GB Portable, Bus-Powered USB 3.0 Storage Solution Mac / PC / USB 3....

Chosen Solution While doing some research on RAM for an upgrade from 4 to 6 Gigs I realized that KIngston has “Mac Specific” RAM. When i Purchased my 2x2GB sticks i made sure the specifications were correct and so far no problems. But, from what I read in a post here one of the patrons mentioned that not having Mac specified RAM can cause problems in the long run. Is this true?...

Chosen Solution Hi All, while replacing the wifi IC over the weekend on this ipad mini 4 (wifi) I accidentally blew a component off the board with my hot air. The component sits right above the battery connector and I believe it had a “TC” or “TN” written on it. Fortunately, I did take a picture of the area pre-accident. I also attach a picture of the pins from a schematic viewer....

Chosen Solution So i just got a cheap nice asus laptop/netbook today and i tried to find the wifi connections but i couldn’t find it , i don’t know where is the place can connect the wifi, is it don’t have any wifi connection ? Some plz help me . See image content: Here is link that will help you hook up your wifi. Tap on or click on the blue link....

Chosen Solution Can someone identify the correct sockets to plug the Antenna cables into on the underside of the Logic Board. This is urgent! Thanks and much appreciated! There are 3 cables, one to the left antenna, one to the right antenna and the third going to something else. Thanks again! This is the closest example I can find, but still no success! I am getting “Searching…” on the iPad and then “No Signal”, Both Sim Card Reader slot has been replaced and also the antenna’s replaced....

Chosen Solution My Iphone has 3 lost pads. ic charge u2. Is it possible to recover these pillows? What is the solution? Meu Iphone está com 3 pads perdidos. ci de carga u2. É possivel recuperar essas almofadas? Qual a solução? It seems not only the pads are missing but also the surface part of the connecting rails have been teared away. They all go directly to the processor, thus there’s no place to bridge them....

Chosen Solution Someone know if there is compatibility between my MacBook Pro 13" Mid 2009 and an actually Apple Thunderbolt Display ? Can i connect my MacBook Pro with this display ? Thank You! Ciao! Sorry to say your system can’t support a Thunderbolt display only the older Mini DisplayPort display. While the two share the same connector, the signaling is different. Apple did make it so the newer Thunderbolt systems could support the older display, just not the other way around....

Chosen Solution Not sure if it’s connected, but my sister just put a connected Micro USB into the USB port of this PC that I’ve had for quite a while. At that moment it just went out, no indication of life, no lights turning on. Checked that the charger is just fine. I’m not sure if connecting the Micro USB trough the wrong port to the computer itself can break it, but it seems the only logical case....

Chosen Solution I performed a factory reset. Now, whenever I turn it on, it cycles every 60 seconds. Nothing I do makes it stop. There is no Hannspree repair venue in my country, so any suggestions? I performed the reset because the tablet kept freezing and crashing. It less than 18 months old! So frustrating! Google’s play services app is giving !&&* to thousands of people lately. Your problem could come from a number if different issues but I would give a try uninstalling Play services updates as first thing....

Chosen Solution Nope, they’re different. Connectors aren’t the same. Incompatible. iPad 6 supports apple pencil, this is one improvement compared to iPad 5 on top of few other hardware upgrades. As you can see from the pictures, iPad 5 and 6 use different digitizers (connector location is different)