Chosen Solution My ASUS X555 lb laptop goes to bios while booting (looping) sometimes. when I checked the bios I found that bios is not recognizing the sata hdd. If I switch off the system, if I am lucky, the system works without any issue. This issue commonly occurs. I tried Linux and Windows 10 OS and in both cases issue with non detection of hdd is present. Same issue here....
Chosen Solution Hi, I’m about to get the new MacBook Pro with an anti-glare screen. As I like the black frame of the glossy screens a lot more, I would like to know If you know about any replacement parts or any other ideas to get the black frame on a anti-glare screen. Thanks for your help. Fabian Take it off and anodize it in any color you like. Hi…. Your best bet would be to spray paint the silver frame…....
Chosen Solution I have an older InFocus projector (bought in 2005?). Haven’t used in a decade. I turned it on, the bulb lights up and projects on the wall, but that’s it. I can’t get it to even display a menu, and when I connect it to my MacBook, nothing new is displayed, just the square block of light from the bulb. Any thoughts on resurrecting this old projector? Thanks!...
Chosen Solution Can be operated using your mobile phone? and Which App can I download? because I lost my remote control. Thanks. Hi @lazaropiedra , You could try this one for an Android phone
Chosen Solution Countdown display on front right side. Kenmore elite microwave model #89999 is very dim, can I change bulb? @kenmoreelite Going by the number you identified your device by it sounds like a Kenmore 295.89999. If the display isn’t working at all, either the main control board or the display board could be at fault. As L Pfaff already pointed out, there are no bulbs on the display. @kenmoreelite , Pat, Kenmore elite microwave model #89999 could not find any info, for this mdl....
Chosen Solution I ordered a screen for an s6 but they sent an s6 edge screen can I use it anyway? Shawna Fleming no you cannot. It is a different screen altogether and will not fit.
Chosen Solution this is a great tablet. but it only has 1gb of ram. am i able to add more ram to it? No, you cannot upgrade the RAM. To my knowledge, no Android device has ever had upgradable RAM. :-/ George @pccheese is right you cant upgrade it as the ram is soldered to the board I cant log on my RCA 10 Viking pro
Chosen Solution Can the RAM on the Acer Chromebook CB5-311-T9Y2 Tegra K1 be upgraded on the 2GB model to 4GB (or more)? From what I can find online it appears the system has soldered on RAM so its not upgradable. You may want to give Acer tech support a call to double check. No, it can’t be upgraded. But you can get a bit more performance using some virtual ram from the SSD....
Chosen Solution No matter where brightness slider is positioned the screen never gets brighter than 1/4 with auto brightness switched on or off. Auto brightness does not work at all. All functions work fine including both cameras. Looking at screen facing camera, resembles a quarter moon sliver of lighter coloured material. Advice??? While you don’t normally fiddle with the FCAM Sensor flex when replacing a battery, it is the first thing I would check in this instance....
Chosen Solution Hello, I would like to know if it was possible to change the trackpad on my 2014 MacBook to a Force Touch Trackpad. You’ll need to wait until the system is shipped and the IFIXIT crew get their hands on one. You’ll need to wait to be sure. From what the Apple presentation shows I don’t think it would work. Remember, there is more than just fitting in, the logic board needs to support it....
Chosen Solution Can I change ac pressure switch without draining refrigerant on 2012 Ford F-150 3.7l v6 I believe you were miss informed but you don’t half to drain your a/c fluid. You have what is called a shrader valve. The pressure switch screws onto the sharder valve . If your issue is in that valve then yes you will lose pressure. So no the pressure does not half to evacuated when changing the pressure swith cause the sharder valve will keep the system contained...
Chosen Solution I charged my iPhone 4 during the night. In the morning, this is what happend: Image iPhone can’t be turned on. Charging with original charger doesn’t help. The USB cable was Apple’s and the charger wasn’t. Help please! Hold the cicle button and power button at the same time for 20 seconds. This is a hard boot. I had the same problem it works. This happens because the phone lost all power before you began charging it....
Chosen Solution how do i turn on the Dino game no me end this go now Are you on a school device? If so, the dinosaur game might have been disabled by your administrator, and you can’t access it.
Chosen Solution I’m wondering what would be the easiest way to clean the inside of my iPhone 3GS camera lens. It has a lot of particles accumulated, and the resulting pictures are very blurry. I want to avoid doing the whole “camera module take-apart” guide. Aren’t there any other ways? Thanks for any tips! short answer? no. the plastic lens is part of the rear case, to get to it you must take the motherboard out....
Chosen Solution where can i found this part? enderuw, that is your click wheel. You can get that from here. You will have to purchase the center button separately. Of course, you want to make sure that you check local suppliers as well. It is relatively inexpensive and not to hard to replace. Hope this helps, good luck.
Chosen Solution I have the Sharp LC-50LD266K TV and have tested the power board and all is good. I thought the no picture may have been the T-Con board as the output reading were close to zero when plugged into the two ribbons. I bought a new T-Con board and replaced the old. Before putting the output ribbons onto the board I tested the output and it showed proper voltages. When I replaced the ribbons and re-tested the voltages went back to zero, even on the new board....
Chosen Solution Hi there. I have an iPad Aid 2 cellular model, purchased December 2014, and the battery only lasts about 30 minutes. It shows full charge, but when it is being used in Wifi or Cellular untethered mode, the iPad battery indicator changes to less than 10% and then dies. I have the latest IOS version. Do I need to replace the battery? Your battery is most likely at the end of its life....
Chosen Solution Hi Guys, Had a night out, and the phone fell on a swampy floor of beer at a grungy bar. The next morning I realized there was beer inside the casing, so I did the bag of rice solution. Following the bag of rice, and 2 months down the road, my phone has a couple issues: -Power button doesn’t do anything -Phone shuts off randomly every couple days, and is stuck in an apple logo boot loop....
Chosen Solution the lcd was broken after a drop. tried replacing the lcd assembly but now the tablet won’t turn on. even with the old screen i can’t seem to get it booted. tried al the button combinations but it didn’t work. tried unplugging the battery for 10 min. still nothing. when i press the power button the led flashes 3 times, that’s it… any idea’s ??? iBar, this can be caused by a bad/drained battery....
Chosen Solution hi, i need some help, i install a new screen because the old get broke, so, when i install the new screen it doesnt work it gets black screen, but some times when y take it off and put it again it gets white screen, so what i think (and im sure) is that the dock connector is dirty PLEASE help me how can i clean it? carlos, just clean it the same way you would clean a water damaged iPhone....
